Printing Citeo Triman >= 6.0 mm on 203 DPI Thermal Printers Without Pixel Bleed
How to compile French Citeo Triman and Info-Tri graphics as integer-aligned ^GFA binary hex matrices instead of blurry 72 DPI JPEGs on Zebra GK420d, Munbyn, and Rollo printers.
| Statutory Min Height | >= 6.0 mm (48 dots @ 203 DPI) |
|---|---|
| PackPass Compiled Target | 6.50 mm (52 dots @ 203 DPI / 78 dots @ 300 DPI) |
| Raster Format | 1-bit Zebra ZPL II ^GFA Binary Hex |
| Clear Zone | >= 1.0 mm (8 dots @ 203 DPI) unobstructed perimeter |
1. Why standard raster PNG/JPEG imports fail French DGCCRF legibility checks
Most warehouse printing tools convert an RGB logo into a scaled bitmap with anti-aliased grey edges before sending it through a CUPS or Windows thermal driver. At 203 DPI (8 dots per millimeter), one dot equals 0.125 mm. Grey border pixels trigger Floyd-Steinberg dithering on 1-bit heating elements, breaking the three sorting arrows and the human silhouette into jagged noise.
Worse, shrinking an image down to fit a 50x30 mm polybag sticker frequently drops the Triman emblem below the statutory 6.0 mm height floor (48 dots at 203 DPI) or encroaches on the protective exclusion perimeter.
^FX --- Exact 6.50 mm Triman Box @ 203 DPI (56x52 dots = 7 bytes/row) --- ^FO24,78^GFA,364,364,7,<BINARY_HEX_MATRIX>^FS ^FO116,78^A0N,19,19^FDFR: BAC DE TRI | TRIMAN >= 6.0MM^FS
2. Integer dot-grid compilation & Dual-Print offloading
PackPass EU synthesizes the Triman pictogram directly on an integer monochrome dot grid: 56x52 dots at 203 DPI (6.50 mm) and 80x78 dots at 300 DPI (6.50 mm). Every stroke is strictly on or off (0 or 1), leaving zero grayscale bleed.
If your product sticker cannot host full Info-Tri French text alongside Italian CONAI material lines and GPSR addresses, keep the 50x30 mm sticker focused on SKU/LOT and the 6.5 mm Triman mark while placing the complete multilingual Info-Tri breakdown on the synchronized 100x150 mm (4x6") parcel insert.
- Set thermal driver scaling to 100% (never Fit to Page).
- Maintain darkness between 8 and 10 at 3-4 ips print speed on direct thermal stock.
- Always verify >= 48 vertical dots at 203 DPI or >= 71 vertical dots at 300 DPI before rollout.